Analyses and Case Studies

ISO 17025: Laboratory Accreditation and Why It Is Not Certification

“We are certified to ISO 17025.” The sentence appears in tenders regularly and is almost always wrong. ISO/IEC 17025 does not produce a certificate — it produces an accreditation, and the difference is not terminological but legal and commercial.

This article explains what the standard actually requires, who applies it, what you end up holding, and why laboratory customers increasingly insist on precisely this.

Key Takeaways

  • ISO/IEC 17025:2017 sets the general requirements for the competence, impartiality and consistent operation of laboratories performing testing and calibration.
  • The outcome is accreditation, not certification. What is assessed is technical competence to perform specific methods, not merely the existence of a system.
  • In Bulgaria the body is the Bulgarian Accreditation Service (BAS), the national accreditation body.
  • The scope is the heart of accreditation. A specific list of methods and matrices is accredited — not the laboratory in general.
  • Measurement uncertainty and metrological traceability are mandatory and are the most frequent source of findings.
  • Decision rules for statements of conformity must be agreed with the customer in advance.
  • The management system has two options — A and B; option B suits laboratories already running an ISO 9001 system.

Accreditation versus certification

Certification (e.g. ISO 9001) Accreditation (ISO/IEC 17025)
What is assessed Conformity of the management system Technical competence for specific methods, plus the system
Who assesses A certification body The national accreditation body
Who assesses the assessor The accreditation body International peer evaluation (EA, ILAC)
Assessors Management system auditors Assessors plus technical experts in the method
Document Certificate Accreditation certificate with an annexed scope
Recognition Contractual and commercial International, through mutual recognition arrangements

The practical consequence: an accredited test report is recognised in other countries through the international arrangements, while a management system certificate says nothing about whether a particular measurement is reliable. More on the general distinction is in our article on accreditation versus certification.

Who ISO/IEC 17025 is for

  • independent laboratories testing materials, food, water and fuels;
  • calibration laboratories;
  • in-house plant laboratories that issue reports on their own products;
  • laboratories within regulators and product certification bodies;
  • organisations that perform sampling as a standalone service.
A frequent question: a plant laboratory testing only for internal purposes is not obliged to be accredited. Accreditation becomes necessary when its reports leave the building — to customers, to regulators, or as evidence in a dispute. That is when the question “on what basis should we believe you” needs a documented answer.

The structure of the standard

  1. General requirements. Impartiality and confidentiality. The laboratory identifies risks to its impartiality — including from ownership, management and commercial pressure — and eliminates or minimises them.
  2. Structural requirements. Legal status, defined management responsibility, a documented range of activities and clarity about who is responsible for what.
  3. Resource requirements. Personnel with defined competence, facilities and environmental conditions, equipment with metrological traceability, externally provided products and services.
  4. Process requirements. Review of requests and contracts, selection and validation of methods, sampling, handling of items, technical records, evaluation of uncertainty, ensuring validity of results, reporting, complaints, nonconforming work, data control.
  5. Management system requirements. Option A — the full set described in the standard itself; option B — for laboratories already operating an ISO 9001 system that covers the requirements.

The three places where most points are lost

1. Measurement uncertainty

The laboratory must evaluate measurement uncertainty for each method. The most common failing is not a missing calculation but an uncertainty budget that does not reflect real conditions — taken from a textbook or copied from another laboratory, without the specific equipment, operator and environment.

2. Metrological traceability

Results must be traceable to the SI through an unbroken chain of calibrations. In practice that means calibration by an accredited calibration laboratory whose scope covers your range. A calibration certificate from a non-accredited provider does not establish traceability — and this is established in the first hours of the assessment.

3. Decision rules

Where a report contains a statement of conformity (“pass/fail”), the laboratory must have a decision rule that accounts for uncertainty, agreed with the customer. A measured value sitting exactly on the limit with significant uncertainty is the classic case in which the absence of a rule makes the report contestable.

Practical advice: the decision rule is agreed during review of the request, not explained afterwards. Record it in the quotation or the contract — that way the customer also knows what “conforms” means in that particular report.

The route to accreditation

  1. Define the scope. Which methods, for which products or matrices, over which range. This is a commercial decision before it is a technical one — accredit what you sell.
  2. Gap analysis. Compare current practice against the standard and against the accreditation body’s own documents.
  3. Build the system. Documents, records, competence, equipment, traceability.
  4. Validate the methods. Standard methods are verified; laboratory-developed methods are validated in more depth.
  5. Ensure validity of results. Internal quality control and participation in interlaboratory comparisons or proficiency testing.
  6. Internal audit and management review. Both mandatory before the application is submitted.
  7. Application and on-site assessment by a team including technical experts, with witnessing of real testing.
  8. Close the findings and receive the accreditation, followed by surveillance assessments.

A realistic timeline for a laboratory starting from scratch is eight to fourteen months. The longest step is usually not the documentation but method validation and accumulating data from interlaboratory comparisons.

The relationship with ISO 9001

A laboratory running an ISO 9001 system can apply option B and avoid duplicating the management system requirements. That saves real work — document control, internal audit, management review, corrective action and risk handling already exist.

One clarification matters: option B does not reduce the technical requirements. Competence, equipment, traceability, validation and uncertainty are assessed identically under both options.

Preparing a laboratory for accreditation?

We run a gap analysis against ISO/IEC 17025, support method validation and uncertainty budgets, and prepare the team for the on-site assessment — including its technical part.

Get in touch →

Conclusion

Accreditation to ISO/IEC 17025 is harder than management system certification because it assesses something more specific: whether this particular laboratory, with this equipment and these people, can produce a reliable result by this method. That is also why it carries more weight with a customer, a regulator and a court.

If you are considering accreditation, start not with the documents but with the scope. The list of methods determines all the work that follows — and it is the one decision that is hard to change halfway.

Frequently Asked Questions

Can a laboratory be certified to ISO 17025?

No. ISO/IEC 17025 leads to accreditation rather than certification. Accreditation is granted by the national accreditation body and assesses technical competence for specific methods, not only conformity of the management system. The phrase “ISO 17025 certificate” is technically incorrect.

Who accredits laboratories in Bulgaria?

The national accreditation body in Bulgaria is the Bulgarian Accreditation Service (BAS). Accreditation granted by it is recognised abroad through the mutual recognition arrangements of the European and international accreditation organisations.

Is accreditation mandatory for an in-house laboratory?

It is not mandatory where the laboratory tests only for internal purposes. Accreditation becomes necessary when reports are provided to customers or regulators, or used as evidence in a dispute, and where legislation or a contract requires it explicitly.

What is the scope of accreditation?

The scope is the specific list of tests or calibrations for which the laboratory is recognised as competent — method, product or matrix, measured characteristic and range. That list is accredited, not the laboratory in general, so a test outside the scope cannot be reported as accredited.

What is a decision rule?

A decision rule describes how measurement uncertainty is taken into account when a report states conformity with a requirement. It must be defined and agreed with the customer before the work is performed, usually at review of the request, and stated in the report.

What is the difference between option A and option B?

Option A means the laboratory builds its management system to the requirements described in ISO/IEC 17025 itself. Option B is available to laboratories operating an ISO 9001 system that covers the relevant requirements. The technical requirements for competence, equipment, traceability and uncertainty are identical under both options.

How long does accreditation take?

For a laboratory starting without an established system, a realistic timeline is eight to fourteen months. The longest part is usually not the documentation but method validation and accumulating data from internal quality control and interlaboratory comparisons.

DD

Dimitar Dimitrov

Lead ISO Consultant · Dimitrovi Standard

With over a decade of experience in building and certifying management systems, Dimitar helps Bulgarian companies pass the ISO process successfully — from choosing an accredited body to the final audit. Meet the team →